UHC-517C Corrosion resistant magnetical float level meter
Corrosion-resistant type is made of UPVC and PP pipes. It is suitable for ordinary acids and alkaline solutions at low temperatures, but not for aromatics, hydrocarbons, ketones, esters, etc.
Description
SELECTION CRITERIA
INSTALLATION AND USE
FIELD INSTALLATION
UHC-517C corrosion resistant magnetical float level meter without blind zone is used to measure the level in such occasion: larger corrosive media and higher working temperature.It adopts stainless steel with inner lining of polytetrafluorothylene push flanging advanced new technology.It's featured with reliable structure and long life.Corrosion resistant type adopts UPVC 、PP tubes combination to be suitable for common acid、alkaline solution in low working temperature,but it isn't suitable for aromatics、hydrocarbon、ketone¡¢esters etc.
| Measuring range:(300～6000)mm | ||
| (Center distance between the two flanges) | ||
| Working pressure: ≤2.5MPa | ||
| Working temperature: ≤200℃ | ||
| Media density: (0.45～2.0)g/ cm³ | ||
| Flange standard: HG20592-20635-97 | ||
| If other flange standard is required,users should note it. | ||
| Material: Stainless steel with inner lining of polytetrafluoroethylene、PP、PVC | ||
| Floater: Polytetrafluoroethylene、PP、PVC | ||
| If other material is required,users should note it. | ||
| Options | ||
| UHC-517C－ | ||
 |
D | Output (4～20)mA two-wire system transducer |
| 口 | Level switch: C、E、F can be choosed as options | |
| Q | Intrinsic safety: ibIICT5 | |
| B | Flameproof enclosure: dIIBT5 | |
| T | With isolation safety barrier | |
| M | Electric heat tracing device | |
| A | With fluorescene post display instrument(vertical type) | |
| B | With fluorescene post display instrument(horizontal type) | |
| 口 | Working pressure MPa | |
| 口 | Media density g/ cm³ | |
| 口 | Measuring range L=mm | |
Maybe you like
Review
